Air Conveyor for OEM and Hard Enduro Engine Guard for KTM 790ADV – Twalcom®

DESCRIPTION

The Air Conveyor designed and produced by us has been specially designed as well as to protect the open area of the engine guard from mud and stones, also and above all to convey the air flow inside the “closed” area of the 790 Adventure.
In fact, the area delimited by the tank, by the relative side covers and by the engine guard constitutes a closed area where heat dissipation is severely limited. The Air Conveyor designed by us allows the air to enter and to be directed towards the manifolds and the lower part of the engine and this without in any way precluding the flow destined for the water radiator.

The Air Conveyor can be mounted without having to disassemble the engine guard, with extreme simplicity both on the original engine guard (OEM) and on the Hard Enduro Engine Guard produced by us. And above all it is disassembled with the same simplicity and speed with the original KTM on-board tools precisely to allow an accurate cleaning of mud, grass or dirt.

Structure: Peraluman 2.5 mm. Screws supplied in stainless steel.

Available in the colors: Silver, Black, Orange Racing and Electric Blu.

Instructions: clear instructions in Italian with photos.